Advanced Search | Search Tips

Add to Wish List

Click the button below to add the Delrin Replacement Rods to your wish list.

You Recently Viewed...

Our Newsletter

Delrin Replacement Rods

Calculated at checkout

Add to Wish List

Click the button below to add the Delrin Replacement Rods to your wish list.

Product Description

October Country Replacement Rods come in 3/8" or 5/16" diameter with 8-32 or 10-32 threads on both end.  These rods are a direct replacement for your factory rod.  We can make custom rods, we just need to know the length and the diameter contact us directly for custom rods.

For rod lengths refer to the ramrod reference page above (ramrods).  If you don't see your gun in the list measure your current rod and choose that length.

Find Similar Products by Category

Write your own product review

Product Reviews

  1. Great replacement ramrod. 5 Star Review

    Posted by on 8th Feb 2017

    Ordered the one listed for my gun and it fits great.Not near as afraid to break it as a wooden rod.Have ordered several times from October Country and everything arrived on time and packed well. Have even emailed them and called once about products and they are very quick to respond and very helpful.

  2. replacement T/C ramrod 5 Star Review

    Posted by on 16th Feb 2016

    Works perfect!!

  3. Replacement Ramrod 4 Star Review

    Posted by on 21st Oct 2014

    I recently bought a used CVA Hawken in 54 cal. and with a 12 gauge barrel. It came with 2 wooden ramrods and I know these have a tendency to break, especially in cold weather, so before I broke the originals I ordered a replacement. I originally ordered the one for a CVA Hawken on October Country's replacement list, which was 3/8 inch diameter, this was too large for my gun, the barrel tennon sat too low in the stock, I think from too much wood sanded off when the kit was built. I wound up reordering a 5/16 diameter a little too long and cut it down. This one fits and is relatively secure in the gun. I will keep the 3/8 diameter for a range/cleaning rod for the gun. The only other issue is there is a lot of flex in these rods, but, because of this I do believe they are unbreakable.

Customers Who Viewed This Product Also Viewed