Ramrod Accessories

The fouling scraper is used to scrape loose the build-up on the breech plug of most muzzleloaders.  Our fouling scrapers are made of brass with an 8-32 or 10-32 threaded stud.  Made in the USA by October Country, a manufacturer of muzzleloading...

Made from select hardwood with a walnut finish.  It fits over ramrods to ease the pressure on the shooter's hand.  It also helps to ensure a fully seated load.  Not threaded.

Designed by October Country to pull a ball or bullet without harming the rifling of the barrel. The steel puller screw is centered in a brass disc, sized to match the bore of your gun. This will prevent the screw from deflecting and gouging the...

Allows you to use 10-32 thread accessories on an 8-32 thread ramrod and visa versa. Or, use a 5/16" shotgun accessory on a standard ramrod.        

Bore Cleaning swabs or mops are designed especially for muzzleloading firearms. The brass bases are threaded in the two standard sizes of 8x32 and 10x32 (the most popular). These sizes will fit nearly all standard ramrods and cleaning rods without using...

Phosphorous Bronze bore brushes distributed by MSM. The wire in these brushes will reverse easily in the bore. The solid bases are drilled, then the brass wire stem is inserted thru the base and assembled with the wire bristles. This prevents the brush...

These tips have a spherically cupped end which will center the ramrod over the ball. Available in brass only, drilled and tapped for either 8-32 or 10-32 threads. Be sure to pin the tips for safety(tip are designed to be flush with the rod diameter)...