OCTOBER COUNTRY

October Countrys fine stainless steel wire is attached to a brass handle. Screwing into a brass sleeve prevents the steel wire form bending during storage.

This plug, together with bushing, is fitted into the typical wooden base plug on the powder horn.  They serve as a mount for the shoulder strap and as a removable filling plug.  The threaded bushing...

A traditional short starter. You can select a handy loading tool feature of the brass rod leg with a 10-32 or 8-32 drilled tip. The handle is made from antler. 1/4 "sized to fit .32 brass only, ...

Leather will vary in color due to stock changes. Lace can be use for extending you back strap, tying on accessories on to your bag or where ever you may need or for what ever you may need. Lace...

Strap is 2" by 48" inches long and made from the same oil tanned leathers that we use for our bags.  Straps will vary in color because of stock changes. The strap can be used for extending you back...

Designed by October Country to pull a ball or bullet without harming the rifling of the barrel. The steel puller screw is centered in a brass disc, sized to match the bore of your gun. This will...

This is the perfect medium size shooting bag. The classic styling of the beavertail flap makes this Eastern type bag a favorite of muzzleloaders all over the country. The dimensions are 7" x 9" with...

Our simple lace to tie anything anyplace, especially to your bag.  The Boot Lace is 5/32 x 72 inches and the Powder Horn Strap is 3/8 x 54 inches long.  Our laces and straps are made from oil tanned...

Rugged solid brass 12" rod cross pinned to a wire-wrapped hardwood handle.  Available in 3 sizes: 1/4" diameter by 8-32; 5/16" diameter by 10-32; and 3/8" diameter by 10-32.  Complete with brass bore...

These tips have a spherically cupped end which will center the ramrod over the ball. Available in brass only, drilled and tapped for either 8-32 or 10-32 threads. Be sure to pin the tips for...

We make our short starter with a hardwood ball and a solid brass leg. The small ball seater is brass as well. The leg is cupped for round balls. The best part of the short starter is that the brass...

This 3" long brass handle comes with 8-32 or 10-32 stud to screw into one end of ramrod converting it into a convenient cleaning rod.  The standard diameter is 3/8" for 3/8" rods but can be made can...