Ramrods & Accessories

Makes loading your rifle with the under-gun rod much easier. The 1 1/2" diameter hardwood ball fits easily in your hunting bag but provides great leverage for firmly seating the bullet when loading. A brass (unthreaded) bushing is installed for long life...

Makes easy work of retrieving lost patches. Made with heavy duty  steel spring wire permanently attached to a brass fitting. Comes in 8-32 or 10-32 thread. These will fit in .32 caliber up to shot guns and bigger guns.  Made in the USA by...

The breech plug scraper is used to scrape loose the build-up on the breech plug of most muzzleloaders.  Our version is a brass scraper with ends cut to conform to the T/C breech plug powder wells. Improves reliability and consistency...

Bore Cleaning swabs or mops are designed especially for muzzleloading firearms. The brass bases are threaded in the two standard sizes of 8x32 and 10x32 (the most popular). These sizes will fit nearly all standard ramrods and cleaning rods without using...

Phosphorous Bronze bore brushes distributed by MSM. The wire in these brushes will reverse easily in the bore. The solid bases are drilled, then the brass wire stem is inserted thru the base and assembled with the wire bristles. This prevents the brush...

These traditional ramrods are made from selected straight grain hickory and have a threaded ramrod tip. The tip is secured with a cross pin. Can be ordered in 3/8", 5/16" or 9 MM diameter. The 9 MM (23/64) rod is for the European manufactured guns...

All the tools you need for your bench ramrod.  Includes a cleaning jag, bore mop, ball puller, patch puller, and bore brush. The 45 jag has a 3/8" base, the rest are 7/16".  Available in 8-32 or 10-32 threading.  Made in the USA by October...

Our solid brass button jags with a threaded steel stud for strength and durability.  The jag features a spherically cupped end for loading.  The top base has been knurled at the base for a good grip when your hands do not have the...

Our 1 1/2" cleaning jags are made from solid brass and feature a steel threaded stud to prevent breakage.  The jag also features a spherically cupped end which allows you to load without harming the ball.  The base has been...

These tips have a spherically cupped end which will center the ramrod over the ball. Available in brass only, drilled and tapped for either 8-32 or 10-32 threads. Be sure to pin the tips for safety(tip are designed to be flush with the rod diameter)...

Now you can put your own tips on a wood, plastic or fiberglass rod. The kit includes the necessary pins to afix the tips to your ramrod. Available in 8-32 or 10-32 threads.  Made in the USA by October Country, a manufacturer of muzzleloading...

These traditional ramrods are made from selected straight grain hickory and have a threaded ramrod tip. The tip is secured with a cross pin. Can be order 3/8", 5/16" or 9 MM wide by 36" long. The 9 MM rod is for the European manufactured guns.  ...