Ramrod Accessories

The fouling scraper is used to scrape loose the build-up on the breech plug of most muzzleloaders.  Our fouling scrapers are made of brass with an 8-32 or 10-32 threaded stud.  Made in the USA by October Country, a manufacturer of muzzleloading...

Made from select hardwood with a walnut finish.  It fits over ramrods to ease the pressure on the shooter's hand.  It also helps to ensure a fully seated load.  Not threaded.

Designed by October Country to pull a ball or bullet without harming the rifling of the barrel. The steel puller screw is centered in a brass disc, sized to match the bore of your gun. This will prevent the screw from deflecting and gouging the...

These tips have a spherically cupped end which will center the ramrod over the ball. Available in brass only, drilled and tapped for either 8-32 or 10-32 threads. Be sure to pin the tips for safety(tip are designed to be flush with the rod diameter)...