This new style horn is made from a real buffalo horn with the natural color of the black horn.  The throat is finished with flats down to the strap groove and large tacks are placed around the base.  The base plug is made of...

This standard valved powder horn comes with an American made push type valve. A removable pour spout comes with the horn. A flask spout can be ordered and used in place of the spout.   A strap groove on the front and a brass acorn finial in the...

This beautifully done horn has an engraved swirl wrapped around the neck.  The wood base has a staple inserted for attaching the leather carry strap, that is included. Available in a natural or stained finish. The pouring tip...

Our Poor Boy Trade Priming Powder Horn is a finished and polished cow horn. The base plug is custom fitted to the natural shape of the horn and secured with brass brads.  A groove is cut in to the tip of the horn, and a staple...

This all brass Bore Light drops down the muzzle of any rifle or pistol: .50 cal and larger. It brightly illuminates the bore interior. Replacement batteries also sold.

Convenient for carrying pre-measured loads. Holds up to 150 gr. of powder or three 50 gr. pellets or bullets. Both ends seal for quick loading in the field. Sold in packs of 3.

These items are essential for every black powder shooter. Just unscrew the powder can lid and screw in the pouring spout. Now you can fill your flask or your powder horn with ease. The larger white cap is 2" wide inside, the middle black one is 1 1/2"...

Tubes keep exact charges ready and dry. Place pre-measured powder charge in plastic tube and cap. This facilitates rapid and accurate reloading. Set of 5.

These traditional ramrods are made from selected straight grain hickory and have a threaded ramrod tip. The tip is secured with a cross pin. Can be ordered in 3/8", 5/16" or 9 MM diameter. The 9 MM (23/64) rod is for the European manufactured guns...

The handle on this short starter is a 1 3/4" diameter hardwood ball. The long leg is select hickory with a brass tip to prevent splitting. The short leg is solid brass on all the starters. Both legs are spherically cupped to prevent damage to the...

We make our short starter with a hardwood ball and a solid brass leg. The small ball seater is brass as well. The leg is cupped for round balls. The best part of the short starter is that the brass leg won't break like some wood starters. ...

All the tools you need for your bench ramrod.  Includes a cleaning jag, bore mop, ball puller, patch puller, and bore brush. The 45 jag has a 3/8" base, the rest are 7/16".  Available in 8-32 or 10-32 threading.  Made in the USA by October...