Ramrod Accessories

Our solid brass button jags with a threaded steel stud 8-32 or 10-32 for strength and durability.  The jag has a flat base for ease in loading shotgun wads.  The top of base has been knurled for a good grip when your hands do not...

The fouling scraper is used to scrape loose the build-up on the breech plug of most muzzleloaders.  Our fouling scrapers are made of brass with an 8-32 or 10-32 threaded stud.  Made in the USA by October Country, a manufacturer of muzzleloading...

Made from select hardwood with a walnut finish.  It fits over ramrods to ease the pressure on the shooter's hand.  It also helps to ensure a fully seated load.  Not threaded.

Our sabot jags make an exact fit for all kinds of bullets, Great Plains, Buffalo, Maxi Ball, Maxi Hunter and sabot bullets, too.  Made from solid brass and features a steel threaded stud to prevent breakage.  The jag features a...

The October Country Ramrod Jag Tip is a solid brass tip that can be used as a loading tip on rods.  It has Sure Grip knurling on the bottom rung like our Sure Grip cleaning jags.  They are drilled 5/16 and 3/8 to fit snug on your wood,...

Makes loading your rifle with the under-gun rod much easier. The 1 1/2" diameter hardwood ball fits easily in your hunting bag but provides great leverage for firmly seating the bullet when loading.

Handy brass ramrod guide protects the bore at the muzzle from wear during cleaning and loading. The conical design allows the guide to be used on all calibers. Perfect for use with brass, aluminum or steel ramrods.  The 3/4"  rod guide is for...

Designed by October Country to pull a ball or bullet without harming the rifling of the barrel. The steel puller screw is centered in a brass disc, sized to match the bore of your gun. This will prevent the screw from deflecting and gouging the...

Allows you to use 10-32 thread accessories on an 8-32 thread ramrod and visa versa. Or, use a 5/16" shotgun accessory on a standard ramrod.        

Makes loading your rifle with the under-gun rod much easier. The 1 1/2" diameter hardwood ball fits easily in your hunting bag but provides great leverage for firmly seating the bullet when loading. A brass (unthreaded) bushing is installed for long life...

The breech plug scraper is used to scrape loose the build-up on the breech plug of most muzzleloaders.  Our version is a brass scraper with ends cut to conform to the T/C breech plug powder wells. Improves reliability and consistency...

Bore Cleaning swabs or mops are designed especially for muzzleloading firearms. The brass bases are threaded in the two standard sizes of 8x32 and 10x32 (the most popular). These sizes will fit nearly all standard ramrods and cleaning rods without using...