Hand forged rustic gun hangers.  Inside each gun hanger are strips of leather to protect your gun. The picture shows a side view of one hanger which has a 2 inch opening.  This product comes in a set of 2 with the screws for...

Muzzle Mitts fit right over your barrel. Used properly they keep out snow, dirt and moisture from entering inside your barrel. The Muzzle Mitt does not alter your firing power or accuracy; just shoot through the mitt. 10 per package.

T-Handle Short Starter features a hardwood handle with a 2-piece solid brass rod, coupled with standard 10x32 threads. By removing the seating end of the brass rod, and screwing the T-Handle onto a standard ramrod, it will extend the length of your...

A traditional short starter. You can select a handy loading tool feature of the brass rod leg with a 10-32 or 8-32 drilled tip. The handle is made from antler. 1/4 "sized to fit .32 brass only,  5/16" size for .36 to .40 caliber and for .45 caliber...

This starter is designed for all long conical bullets and sabots. The end is the exact fit that you want to protect the tip on the bullet. Its unique tip design protects hollow points of soft lead from damage caused by standard round ball starters. The...

October Countrys fine stainless steel wire is attached to a brass handle. Screwing into a brass sleeve prevents the steel wire form bending during storage.

This lead dipper has a cast iron head.  With it's effective design, you get consistent, top quality bullets time after time.  Wooden handle stays cool while in use.

This is the same material as our October Country dry patches.  You cut the traditional patches yourself.   Package contains 6 strips that are 1 1/2" wide and 36" long.   

This superior quality Pillow Ticking is a pleasure to shoot. Why take a chance at the fabric store? October Country ticking is always uniform in thickness 0.015 (Red) or 0.018 (Blue) in strips that are 1.5" wide and 36" long.  Packages...

Latigo leather knife sheath with rivets and belt loop.  Works well with knives having 4 1/2inches 5 1/2 inches blade and no guard.

Ox Yoke Wads are the traditional wads for shotgunners. Over Shot wads now come in individual 100 packs.  Powder goes in first, then over powder wad, then the cushion wad.  Next is the shot, then the over shot wad.

A must for inline shooters. The steel wrench will remove 209, Musket and #11 nipples PLUS the breech plug on Traditions and CVA inlines. Steel handle included.