Powder Horn Valve Bushing
- SKU:
- 03-16356
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
The bushing that attached to Powder Horn Valve. Bushing can be epoxied into the horn tip, thus providing a better thread in which to screw the horn valve.
2 Reviews
-
Powder horn valve bushing.
The install was fairly easy of this bushing. I recommend using a Dremel Tool to make the final fit. Be careful using the glue that it doesn’t overflow into the threads. A nice piece.
-
Fast shipping
Used bushing on two powder horns easy to install
Related Products
Related Products
Powder Horn Valve
$18.82
Install this Fast Flow valve on your horn. This valve when in the open position, has a straight-through 17/64 inches diameter hole for the fast flow of powder. The valves will accept standard...
Hunter Powder Horn with Valve
$111.79
This standard valved powder horn comes with an American made push type valve. A removable pour spout comes with the horn. A flask spout can be ordered and used in place of the spout. A strap...
Hunter Valved Priming Powder Horn
$92.07
Our Hunter valved Primer is handy for flintlocks as well a the hunter. The tip has a 3 grain, push style valve. The base plug has a brass bushing with a brass acorn screw. ...
The Nesbitt Powder Horn
$163.58
This horn was originally made by Harold Moore for Mike Nesbitt a friend and fellow blackpowder shooter. Mike had a picture of the original horn in the January-February 2013 Muzzleloader...