This  7/16" drive or saddler punches is forged from the best grade tool steel, carefully hardened and tempered, with polished barrel. The hole tapers back from the cutting edge so that the punching clears freely and require only a light blow with...

This  13/32" drive or saddler punches is forged from the best grade tool steel, carefully hardened and tempered, with polished barrel. The hole tapers back from the cutting edge so that the punching clears freely and require only a light blow with...

This  3/8" drive or saddler punches is forged from the best grade tool steel, carefully hardened and tempered, with polished barrel. The hole tapers back from the cutting edge so that the punching clears freely and require only a light blow with the...

This  5/16" drive or saddler punches is forged from the best grade tool steel, carefully hardened and tempered, with polished barrel. The hole tapers back from the cutting edge so that the punching clears freely and require only a light blow with...

Osborne arch punches are forged in one piece from the finest special carbon steel. This punch is 3/8” diameter.  A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel...

Front ivory bead sight by Lyman.  Model 31 BA, .240 height, 17/32 dove tail.

Front ivory bead sight by Lyman.  Model 31 KA, .410 height, 11/32 dove tail.

American made Novaculite flints, same flint that was included in the Thompson Center Rifle kits/boxes.  Sold individually and available in 7/8" by 1".  These are a cut flint and are double sided.

4 piece 44" rod is made of aluminium and has a plastic handle and jags. 

This style is not for early rifles as is the low profile. Use on very late percussion era full stock rifles. Very well suited for use on half stock rifle. Made from brass.

This iron flash guard protects the shooter next to you from over spray vented from your flash hole. This flash guard is shaped with a long arm to provide one contact point. Reshape, or alter as needed. This protection is required at...

7/16" high by 1-1/8" long.