Rugged solid brass 12" rod cross pinned to a wire-wrapped hardwood handle.  Available in 3 sizes: 1/4" diameter by 8-32; 5/16" diameter by 10-32; and 3/8" diameter by 10-32.  Complete with brass bore guide.  Order cleaning jag in your...

Traditions .50 9 3/4" Blued Octagonal Barrel 1 in 20" twist; double set trigger. Fixed blade sight. 15 1/2" long 2 lb 14 oz. A classic hooked breech pistol with remarkable authenticity. This pistol's primitive-style adjustable rear sight and double-set...

Traditions .50 Cal 9 1/2" Blued Octagonal Barrel 1 in 20" twist; double set trigger. Fixed/blade sight. 15 1/2" long 2lb 14 oz., 6x1 rifle nipple. A classic hooked breech pistol with remarkable authenticity. This pistol's primitive-style...

Our most popular style of patch. 100% cotton Prelubed patches. Lubed with Ox-Yoke s improved Wonder Lube 1000+. During testing, 1000 consecutive shots were fired in a test rifle using black powder, without cleaning between shots. The rifle loaded safely,...

These small hangers are great for hanging your smaller items like coats, hats and etc. These hangers are smaller than our gun hangers and will not work for a gun.  The opening is 1/2 inch wide. Can be purchased single or in a set of 2.

Hand forged rustic gun hangers.  Inside each gun hanger are strips of leather to protect your gun. The picture shows a side view of one hanger which has a 2 inch opening.  This product comes in a set of 2 with the screws for...

Muzzle Mitts fit right over your barrel. Used properly they keep out snow, dirt and moisture from entering inside your barrel. The Muzzle Mitt does not alter your firing power or accuracy; just shoot through the mitt. 10 per package.

T-Handle Short Starter features a hardwood handle with a 2-piece solid brass rod, coupled with standard 10x32 threads. By removing the seating end of the brass rod, and screwing the T-Handle onto a standard ramrod, it will extend the length of your...

A traditional short starter. You can select a handy loading tool feature of the brass rod leg with a 10-32 or 8-32 drilled tip. The handle is made from antler. 1/4 "sized to fit .32 brass only,  5/16" size for .36 to .40 caliber and for .45 caliber...

This starter is designed for all long conical bullets and sabots. The end is the exact fit that you want to protect the tip on the bullet. Its unique tip design protects hollow points of soft lead from damage caused by standard round ball starters. The...

October Countrys fine stainless steel wire is attached to a brass handle. Screwing into a brass sleeve prevents the steel wire form bending during storage.

This lead dipper has a cast iron head.  With it's effective design, you get consistent, top quality bullets time after time.  Wooden handle stays cool while in use.