These cow horns (sold individually) are for those who would like to make their own powder horn.  They have the scales sanded off and are polished.  They are typically a mottled white with honey or brown colored tips (colors vary depending on...

  These cow horns (sold individually) are for those who would like to make their own powder horn masterpiece.  They have the scales sanded off and are polished.  They are mostly white with honey or brown colored tips (colors vary...

 We have designed this muzzleloader to be lightweight, easy to shoot and incredibly accurate for a very modest price. It doesn't matter your experience, the Deerhunter muzzleloader will fit your needs. 24” Octagonal performance barrels have a...

 Guns are not stocked and will take 5 to 6 months for us to receive them after we order them in. There is an extra charges for shipping on all guns.  A choice Longrifles on the American Frontier, the Pennsylvania rifle has a brass patch box,...

Antler handled patch knife.  6.5 inches total length.

The bushing that attached to Powder Horn Valve.  Bushing can be epoxied into the horn tip, thus providing a better thread in which to screw the horn valve.    

A pour spout that screw in to the powder horn valve.

A different looking 3 piece rod.  The handle is made from rings of leather that are pierced with the 3/8" solid brass rod.  Then it is sanded down to a smooth circumference.  The top and bottom of the leather is secured with solid...

This 3" long brass handle comes with 8-32 or 10-32 stud to screw into one end of ramrod converting it into a convenient cleaning rod.  The standard diameter is 3/8" for 3/8" rods but can be made can be made in other diameters for an additional...

Handy brass ramrod guide protects the bore at the muzzle from wear during cleaning and loading. The conical design allows the guide to be used on all calibers. Perfect for use with brass, aluminum or steel ramrods.  The 3/4"  rod guide is for...

Designed by October Country to pull a ball or bullet without harming the rifling of the barrel. The steel puller screw is centered in a brass disc, sized to match the bore of your gun. This will prevent the screw from deflecting and gouging the...

 This is a real handy ramrod accessory. Contains three adapters, 10-32 male to 5/16-27 female, 10-32 male to 8-32 female, and 8-32 male to 10-32 female.  Also 8-32 male to 5/16 female, 10-32 male to 8-32 female and 8-32 male to 10-32...