This 3" long brass handle comes with 8-32 or 10-32 stud to screw into one end of ramrod converting it into a convenient cleaning rod.  The standard diameter is 3/8" for 3/8" rods but can be made can be made in other diameters for an additional...

Handy brass ramrod guide protects the bore at the muzzle from wear during cleaning and loading. The conical design allows the guide to be used on all calibers. Perfect for use with brass, aluminum or steel ramrods.  The 3/4"  rod guide is for...

Designed by October Country to pull a ball or bullet without harming the rifling of the barrel. The steel puller screw is centered in a brass disc, sized to match the bore of your gun. This will prevent the screw from deflecting and gouging the...

 This is a real handy ramrod accessory. Contains three adapters, 10-32 male to 5/16-27 female, 10-32 male to 8-32 female, and 8-32 male to 10-32 female.  Also 8-32 male to 5/16 female, 10-32 male to 8-32 female and 8-32 male to 10-32...

Allows you to use 10-32 thread accessories on an 8-32 thread ramrod and visa versa. Or, use a 5/16" shotgun accessory on a standard ramrod.        

 A complete kit to go with the wood, brass, nylon or fiberglass Under Gun Rods. It includes a bore mop and a "T" handle in addition to the sure grip cleaning jag, ball puller, patch puller, and a bore brush. All have the standard 10-32 thread...

Everything you need for your ramrod. A caliber specific accessory kit including a sure grip cleaning jag, ball puller, patch puller, and a bore brush. They come in 8-32 or standard 10-32 thread.      

October Country Replacement Rods come in 3/8" diameter, 17 3/4" to 28 3/4" long with 8-32 or 10-32 threads on both end.  These rods are a direct replacement for your factory rod.  We can make custom rods, we just need to know the length...

Assembled from solid brass and stainless steel parts for reliability. The valve is operated by a simple downward push into the pan. Priming charges can be reduced by shortening the valve spout. Great for priming nipples also. 3/8 x 1 1/8 overall.  

Install this Fast Flow valve on your horn. This valve when in the open position, has a straight-through 17/64 inches diameter hole for the fast flow of powder. The valves will accept standard flask spouts or the pouring adapter. A pour spout and...

This plug, together with bushing, is fitted into the typical wooden base plug on the powder horn.  They serve as a mount for the shoulder strap and as a removable filling plug.  The threaded bushing is epoxied into the baseplug and the plug...

Our Eagle Head pan primer is made from an antler with an eagle head carved at the tip and a 3 grain priming valve attached to the wood base.  The valve is operated by a simple downward push into the pan. Holds 120 grains of powder. Great for...